Netgear WGT624v4 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 26
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
Router Setup Manual
1-2 Connecting the Router to the Internet
v1.0, April 2007
The Front of the Router
You can use the status lights on the front of the router to verify various conditions.
Figure 1-1
Table 1-1. Status Lights
Status Light
Activity Description
1. Power
On
Off
Power is supplied to the router.
Power is not supplied to the router.
2. Test
On
Blink
Off
The system is initializing or in the middle of a firmware upgrade.
Firmware is upgrading or restoring to factory default is done.
The system is ready and running.
3. Wireless
On
Blink
Off
Indicates that the Wireless port is enabled.
Data transfer
The wireless router radio is off. (See Advanced Wireless Settings in
the Reference Manual.)
4. Internet
On -- Amber
On -- Green
Blink -- Green
Off
The Ethernet cable is connected but the router has not gotten an
Internet address.
The router has an Internet address.
Data is being communicated with the Internet.
No link is detected on this port.
5. LAN (Local Area
Network) Lights
1-4
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off
The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port has detected a link with a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
5
1
2
3
4
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 25 26

Comments to this Manuals

No comments