Netgear R6100 User Manual download pdf (Page 29)

NETGEAR genie Basic Settings

N750 Wireless Dual Band Gigabit Router WNDR4300

1. Select Basic > Wireless to display the Wireless Settings screen.

The screen sections, settings, and procedures are explained in the following sections.

2. Make any changes that are needed and click Apply to save your settings.

3. Set up and test your wireless devices and computers to make sure that they can connect

wirelessly

. If they do not, check the following:

• Is your wireless device or computer connected to your network or another wireless

network in your area? Some wireless devices automatically connect to the first open

network (without wireless security) that they discover

• Does your wireless device or computer show up on the

Attached Devices screen? If it

does, it is connected to the network.

• If you are not sure what the network name (SSID) or password is, look on the label on

the bottom of your router.

Wireless Settings Screen Fields

Region Selection

The location where the router is used. Select from the countries in the list. In the United

States, the region is fixed to United States and is not changeable.

Wireless Network (2.4 GHz b/g/n and 5 GHz)

The b/g/n notation references the 802.11 standards of conformance for the 2.4 GHz radio

frequency.

Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless

stations can see this wireless name (SSID) in their scanned network lists. This check box is

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 124 125

No comments

Netgear R6100 User Manual Page 29