Netgear R6100 User Manual download pdf (Page 89)

Advanced Settings

N750 Wireless Dual Band Gigabit Router WNDR4300

Wireless AP

You can set up the router to run as an access point (AP) on the same local network as

another router.

 To set up the router as an AP:

1. Select Advanced >

Advanced Setup > Wireless AP.

2. Select the Enable Access

Point Mode check box.

3. Scroll down to view the bottom half of the screen to display more instructions.

4. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the other

router

5. Select the check box for the IP address setting that you want to use:

• Get an IP address dynamically from the other router.

The other router on the

network assigns an IP address to this router while this router is in AP mode.

• Fixed IP address (not recommended). Use this setting if you want to manually

assign a specific IP address to this router while it is in

AP mode. Using this option

effectively requires advanced network experience.

6. Click Apply.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 124 125

No comments

Netgear R6100 User Manual Page 89