Netgear DGND4000 User Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 160
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
Advanced Settings
132
N750 Wireless Dual Band Gigabit ADSL Modem Router DGND4000
There are two types of VPN policies:
Manual. All set
tings (including the keys) for the VPN tunnel are input manually at each
end (both VPN endpoints). No third-party server or organization is involved.
Auto. Some pa
rameters for the VPN tunnel are generated automatically. This process
requires using the IKE (Internet Key Exchange) protocol to perform negotiations between
the two VPN endpoints.
To manage the VPN policies:
1. Click ADVANCED > Advanc
ed Setup > VPN Policies to display the following screen:
The Policy Table contains the following data:
Enable. Use this check box to e
nable or disable a policy as required. Click Apply
after you make any changes.
Name. Each policy ha
s a unique name to identify it.
Type. The
type is Auto or Manual.
Local. The IP address or a
ddress range on your local LAN. Traffic must be from (or
to) these addresses to be covered by this policy.
Remote. The IP ad
dress or address range of the remote network. Traffic must be to
(or from) these addresses to be covered by this policy.
ESP. Encaps
ulating Security Payload. This setting specifies the encryption protocol
used for the VPN data.
2. Click th
e appropriate button to manage a VPN policy:
Edit. Edit (modify)
the selected policy. (Select a policy by selecting the radio button.)
Delete. Delete the se
lected policy.
Apply. Save any
changes to the Enable setting for each policy.
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 159 160

Comments to this Manuals

No comments