Netgear PR2000 User Manual download pdf (Page 65)

genie ADVANCED Home

Trek N300 Travel Router and Range Extender PR2000

31. Click the Apply button.

The device information is saved or removed from the MAC Device List.

32. To allocate half of the WAN bandwidth to a special host in heavy traffic situations, select

the Enable Trusted IP address check box.

In the field that is provided, enter the IP address of the trusted host.

33. Click the Apply button.

You settings are saved.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 144 145

NETGEAR Trek 1
N300 Travel Router and Range 1
Extender 1
Compliance 2
Trademarks 2
Contents 3
Chapter 5 USB Port 4
Chapter 6 Security 4
Chapter 7 Administration 4
Chapter 8 Advanced Settings 5
Chapter 9 Troubleshooting 5
Get to know your Trek 6
Unpack Your Trek 7
Position Your Trek 7
Prepare Your Trek 8
Get to Know Your NETGEAR Trek 9
Internet Mode Switch 9
Figure 2. Internet via switch 9
Indicator LEDs 10
Figure 3. Indicator LEDs 10
Table 1. Status LEDs 10
Hardware Setup 11
Power Inputs 12
Power plug 12
Antenna Orientation 13
Product Label 13
WiFi Range Extender Setup 16
DO DON’T 17
WiFi Bridge Setup 20
Connect to the Trek 22
Trek Setup Preparation 23
Gather ISP Information 23
Types of Logins and Access 23
NETGEAR genie Setup 24
******** 25
Upgrade the Trek Firmware 26
Change the Password 26
Password Recovery 27
 To recover your password: 28
Manual Method 29
Wi-Fi Protected Setup Method 30
Internet Setup 34
Basic Wireless Settings 40
 To change the WPA settings: 43
Attached Devices 44
Profile Settings 45
Specify custom settings 47
Setup Wizard 48
 To launch the Setup Wizard: 48
WAN Setup 50
 To change the WAN settings: 50
Default DMZ Server 51
Change the MTU Size 53
Table 2. Common MTU sizes 53
 To change the MTU size: 54
LAN Setup 54
 To change the LAN settings: 55
Use the Trek as a DHCP Server 56
Set Up Address Reservation 58
 To reserve an IP address: 58
Quality of Service Setup 60
 To set up QoS: 61
Scroll down 62
Enhance your local network 66
Enhance Your Local Network 67
Set Up Network Storage 68
View or Configure a USB Drive 69
USB Port 70
 To view network folders: 72
 To add a network folder: 73
6. Click the Edit button 74
 To edit a network folder: 75
Specify Approved USB Devices 76
Share Photos and Multimedia 78
Set Up a Network Printer 81
6. Click the Connect button 83
Security 87
 To block services: 88
Schedule Blocking 90
 To schedule blocking: 90
Manage your network 93
View Trek Status 94
Router Information Pane 94
Internet Port Pane 95
Statistics 96
Connection Status 98
Wireless Settings Pane 100
Administration 101
Specify Log Settings 102
 To specify log settings: 103
Manage the Configuration File 104
Back Up Settings 104
Update the Trek Firmware 106
Fine-tune your network 108
Advanced Wireless Settings 109
Control the Wireless Radio 109
Set Up a Wireless Schedule 110
View or Change WPS Settings 111
 To specify WPS settings: 111
Advanced Settings 112
Dynamic DNS 115
 To set up Dynamic DNS: 115
Static Routes 116
 To set up a static route: 117
Remote Management 119
Universal Plug and Play 121
Traffic Meter 122
Scroll to view 123
Diagnose and solve problems 126
Quick Tips 127
Troubleshoot with the LEDs 127
Power LED Is Off 128
LEDs Never Turn Off 128
Internet Port LED is Off 128
WiFi LED is Off 129
Cannot Log In to the Trek 129
Cannot Access the Internet 130
Troubleshoot PPPoE 131
Troubleshooting 132
Changes Not Saved 133
Incorrect Date or Time 133
Wireless Connectivity 134
View the Trek specs 138
Factory Settings 139
Technical Specifications 140
Supplemental Information 141

Comments to this Manuals

No comments

Netgear PR2000 User Manual Page 65

Comments to this Manuals