Netgear PR2000 User Manual Page 132

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 131
Troubleshooting
132
Trek N300 Travel Router and Range Extender PR2000
3. Enter the Trek user name and password.
The user name is admin.
The default password is password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select Administration > Router Status.
6. Click the Connection Status button. If the fields display the correct IP address and time
information, your PPPoE connection is working.
If any of the fields indicate failure, you can attempt to reconnect by clicking the Renew
button.
The Trek continues to attempt to connect indefinitely.
If you cannot connect after several minutes, you might be using an incorrect service name,
user name, or password. Or your ISP might have a provisioning problem.
Note: Unless you connect manually, the Trek does not authenticate using
PPPoE until data is transmitted to the network.
Troubleshoot Internet Browsing
If your Trek can obtain an IP address but your computer cannot load any web pages from the
Internet, check the following:
Your computer might not recognize any DNS server addresses. A DNS server is a host
on the Internet that translates Internet names (such as www addresses) to numeric IP
addresses.
Page view 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 144 145

Comments to this Manuals

No comments