Netgear PR2000 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 145
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Get Started with NETGEAR genie
24
Trek N300 Travel Router and Range Extender PR2000
Wireless network key or password. Your Trek is preset with a unique wireless network
name (SSID) and password for wireless access. This information is on the product label.
NETGEAR genie Setup
NETGEAR genie runs on any computer or device with a web browser. It is the easiest way to
set up the Trek because it automates many of the steps and verifies that those steps have
been successfully completed. It takes about 15
minutes to complete.
To use NETGEAR genie to set up your Trek:
1. Turn on the Trek by moving the Internet via switch to one of the following positions:
Wired. For an Internet connection with an Ethernet cable
Wireless. For a wireless Internet connection
For information about the Internet via switch, see Internet Mode Switch on page 9.
2. Make sure that your Trek is cabled correctly.
If you want to connect to the Internet with an Ethernet cable, make sure that you have
connected an Ethernet cable between the Internet/LAN port of the Trek and the Ethernet
port of your DSL or cable modem. For more information, see
Internet Connection at
Home Setup on page 18.
3. Make sure that your device is connected with an Ethernet cable to your Trek.
You can also connect your device wirelessly to your Trek. For more information, see Add
Wireless Devices or Computers to Your Trek on page 29.
4. Launch your Internet browser in one of the following ways.
The first time you set up the Internet connection for your Trek, the browser
automatically goes to www.routerlogin.net, and the NETGEAR genie screen
displays.
If you already used the NETGEAR genie, type www.routerlogin.net in the address
field for your browser to display the NETGEAR genie screen. See
Use NETGEAR
genie After Installation on page 25.
5. Follow the instructions on the screen to complete the NETGEAR genie setup.
NETGEAR genie guides you through connecting the Trek to the Internet. For more
information about your Internet connection choices, see
Different Ways You Can Connect
to the Internet on page 14.
6. If the browser cannot display the web page, do the following.
Make sure that the computer is connected to the LAN Ethernet port or wirelessly to
the Trek.
Make sure that the Trek is running. If it is, its WiFi LED is lit.
Close and reopen the browser to make sure that the browser does not cache the
previous page.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 144 145

Comments to this Manuals

No comments