Netgear XE102 User Manual download pdf (Page 16)

XE102 Wall-Plugged Ethernet Bridge User Guide

v1.0, June 2007

3. Select a PowerLine device.

4. Click Enter Password.

5. Enter the password from the label on the back of the selected PowerLine device, and click OK.

6. Repeat this step for all devices that you want attached to your network.

Setting the Network Password

To set the network password:

1. Click the Security tab.

Note: If more than one remote device is listed, you can identify each one from its

MAC address.

Figure 5

Figure 6

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Netgear XE102 User Manual Page 16