Netgear 771S User Manual download pdf (Page 25)

Mobile IP Commands

Rev. 1 Sep.13 Proprietary and Confidential 25

$QCMIPGETP

Identify active profile, or display specific profile’s configuration

information

Return the ID of the active profile, or display configuration information for a specific

profile. Displayed information includes profile state (enabled, disabled), Home Address,

Primary and Secondary Home Agent, etc.

Password required: No

Usage:

• Execution: AT$QCMIPGETP=<mipID>

Response: List of configuration parameters.

Purpose: Display configuration information for the specified Mobile IP profile.

• Query list: AT!QCMIPGETP=?

Response: Returns active profile’s <mipID>

Purpose: Identify the active profile.

Parameters:

<mipID> (Mobile IP profile ID)

• Valid range: 0–5

$QCMIPHA

Set/return active profile’s Home Agent address

Set or return the active profile’s Home Agent (HA) IP address.

Password required: No

Usage:

• Execution: AT$QCMIPHA=”<mipHA>”,<NVCommitState>

Purpose: Set the HA address and indicate if it is to be committed to NV.

• Query: AT$QCMIPHA?

Response:

Returns <mipHA> and <NVCommitState>

Purpose: Display the active profile’s HA IP address and indicate if it is

committed to NV.

Parameters:

<mipHA> (Home Agent IP Address)

• For execution formation, must be enclosed by double quotes.

• IPv4 address format (e.g. “[0..255].[0..255].[0..255].[0..255]”)

<NVCommitState> (Current <mipHA> value committed to NV?)

• 0=Do not commit to NV.

Note: If <mipHA> is not committed to NV, the value is deleted at the end of the

next MIP session or when AT$QCMIPP is called.

• 1=Commit to NV.

Table 4-2: Mobile IP commands (Continued)

Command Description

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

No comments

Netgear 771S User Manual Page 25