Netgear 771S User Manual download pdf (Page 22)

AirCard 77Xs/34xU AT Command Reference

22 Proprietary and Confidential 4114487

$RESET

!RESET

Reset (power cycle) modem

Immediately power cycle the device. (Note: $RESET is for Sprint devices only.)

Password required: No.

Usage:

• Execution: AT!RESET

Response:

Purpose: Power cycles the device.

• Execution: AT$RESET

Purpose: Power cycles the device.

$ROAM

Set/report network roaming mode

(For Sprint devices only)

Set or return the device’s current roaming mode.

Password required: No.

Usage:

• Execution: AT$ROAM=<roamMode>

Purpose: Set the device’s roaming mode.

• Query: AT$ROAM=?

Response: Returns <roamMode>

Purpose: Display the device’s current roaming mode.

Parameters:

<roamMode> (Roaming mode)

• 0=HOME_ONLY

• 1=DOMESTIC

• 2=ALL

$RTN

Reset device to factory default settings

(For Sprint devices only)

Reset the device to its factory default settings and immediately power cycle the device.

Note: Because the device is returned to factory default settings, it will need to be reacti-

vated after it resets.

Password required: No.

Usage:

• Execution: AT$RTN=<MSL>

Purpose: Reset the specified device.

The command will return “ERROR” if the <MSL> is invalid.

Parameters:

<MSL> (Master Subsidy Lock, a.k.a “Service Programming Code” (SPC))

• Available from Sprint

Table 3-2: Modem status, customization, and reset commands (Continued)

Command Description

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comments to this Manuals

No comments

Netgear 771S User Manual Page 22

Comments to this Manuals