Netgear 771S User Manual download pdf (Page 29)

Mobile IP Commands

Rev. 1 Sep.13 Proprietary and Confidential 29

$QCMIPNAI

Set/return active profile’s NAI

Set or return the active profile’s Network Address Identifier (NAI).

Password required: No

Usage:

• Execution: AT$QCMIPNAI=”<mipNAI>”,<NVCommitState>

Purpose: Set the NAI and indicate if it is to be committed to NV.

• Query: AT$QCMIPNAI?

Response: Returns <mipNAI> and <NVCommitState>

Purpose: Display the NAI and indicate if it is committed to NV.

Parameters:

<mipNAI> (Network Address Identifier)

• String in the format of user@domain (example: 7605[email protected])

<NVCommitState> (Current <mipNAI> value committed to NV?)

• 0=Do not commit to NV.

Note: If <mipNAI> is not committed to NV, the value is deleted at the end of the

next MIP session or when AT$QCMIPP is called.

• 1=Commit to NV.

$QCMIPP

Set/return the active profile

Set (activate) a Mobile IP profile to be the active profile and record this in NV.

Note: To use the active profile, you must also enable it using $QCMIPEP.

Password required: No

Usage:

• Execution: AT$QCMIPP=<mipID>

Purpose: Set the specified profile as the active profile.

• Query: AT$QCMIPP?

Response: Returns <mipID>

Purpose: Display the currently active profile’s ID.

Parameters:

<mipID> (Mobile IP profile ID)

• Valid range: 0–5

Table 4-2: Mobile IP commands (Continued)

Command Description

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

No comments

Netgear 771S User Manual Page 29