Netgear XE104 User Manual download pdf (Page 25)

XE104 User Guide

Installing the XE104 Wall-Plugged Ethernet Switch 3-11

v1.0, September 2005

h. Repeat this step for all devices that you want attached to your network.

2. Set the network password.

a. Select the Security tab.

b. Type a password in the Private Network Password text box.

c. Click Set All Devices. The utility should display a pop-up window indicating that the

operation was successful.

Add a Device to an Existing PowerLine Network

If you are adding a device to a PowerLine network where the network password has been left at its

default setting, all that is required is to plug the new device into a power outlet.

If the network password has been set, then the PowerLine encryption utility needs to be run in

order to set the new device to the established network password. The procedure for setting the

password depends on whether the computer running the PowerLine encryption utility is

connnected directly to the new PowerLine device (local) or is connected to a different device in the

PowerLine network (remote).

Figure 3-13

1 2 ... 20 21 22 23 24 25 26 27 28

No comments

Netgear XE104 User Manual Page 25