● LTE only – The connection can be established only on an LTE network. Your device
will not connect to CDMA or GSM networks.
● CDMA only – The connection can be established only on a CDMA (3G) network. Your
device will not connect to LTE or GSM networks.
On the Touchscreen
1. Tap > Settings > Network.
2. Tap Network Mode.
3. Select the network mode that your device can connect to:
In the Zing Manager (http://sprinthotspot)
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Settings > Network > Preferences.
3. Beside Network Mode, select the desired network mode that your device can
connect to.
4. Click Submit.
Configuring Access Point Names
Your device comes preconfigured with the Access Point Name (APN) for Sprint.
To add an APN for another network:
1. Log in to the home page. (See Logging In as an Administrator.)
2. Click Settings > Network > APN.
3. In the blank line, enter the APN details:
• Active – If the new APN is going to be used now, select this button.
• Name – Enter a short description (for example, the carrier name).
• APN – Enter the APN you obtained from the carrier.
• Username – Enter the username you obtained from the carrier (if required).
• Password – Enter the password you obtained from the carrier (if required).
• Select the Authentication mode to be used (None, PAP, CHAP, PAP or
CHAP).
Configuring Networks 104
Comments to this Manuals