Netgear 771S User's Guide download pdf (Page 20)

2. Insert the other end of the cable into the micro-USB port on the side of your device.

3. Insert the AC charger into an electrical outlet. (If the battery is already partially

changed when the charger is plugged into the outlet, your device will power on

automatically.)

While your device is charging, the LCD (and the Zing Manager home page, if your

device is on) shows:

• If your device is on – and the percentage charged (for example, “92%”).

• If your device is off – , the percentage charged (for example, “92%”), and

the message “Charging…”

When your device is fully charged, the LCD (and the Zing Manager home page, if your

device is on) shows:

• If your device is on – and the message “Battery is Fully charged. Please

remove power.” Tap the ‘X’ to close the message.

• If your device is off – and the message “Battery is Fully charged. Please

remove power.” Tap the ‘X’ to close the message.

Charging Through Your Computer

Note: If you will be using the USB connection to connect to the Internet (and not just for

charging your device), you must install the device driver. (See TRU-Install.)

Note: If you are using Mac OS X 10.4.x, after you connect your device you may see a warning

message that your computer is running on UPS backup battery and that you should

Device Basics 12

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 204 205

No comments

Netgear 771S User's Guide Page 20