Netgear RANGEMAX WAG302 User Manual download pdf (Page 63)

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302

Management 4-9

202-10078-01

Viewing a List of Attached Devices

The Available Wireless Station List contains a table of all IP devices associated with the wireless

access point in the wireless network defined by the Wireless Network Name (SSID). From the

main menu of the browser interface, under the Information heading, click the Available Wireless

Station List link to view the list, shown below.

For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the

device is allowed to communicate with the wireless access point or not).

Note that if the wireless access point is rebooted, the table data is lost until the wireless access

point rediscovers the devices. To force the wireless access point to look for associated devices,

click the Refresh button.

Note: A wireless network can include multiple wireless access points, all using the same network

name (SSID). This enables extending the reach of the wireless network and allows users to roam

from one access point to another, providing seamless network connectivity. Under these

circumstances, be aware that only the stations associated with this access point will be presented in

the Available Station List.

Wireless 11b/g Received/Transmitted

Unicast Packets The Unicast packets sent since the WAG302 was restarted.

Broadcast Packets The Broadcast packets sent since the WAG302 was restarted.

Multicast Packets The Multicast packets sent since the WAG302 was restarted.

Total Packets The Wireless packets sent since the WAG302 was restarted.

Total Bytes The Wireless bytes sent since the WAG302 was restarted.

Refresh button Click the Refresh button to update the statistics on this screen.

Table 4-1. Statistics Fields (continued)

Field Description

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 119 120

No comments

Netgear RANGEMAX WAG302 User Manual Page 63