Netgear RANGEMAX WAG302 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
3-2 Basic Installation and Configuration
202-10078-01
For best results, place your wireless access point:
Near the center of the area in which your PCs will operate.
In an elevated location such as a high shelf where the wirelessly connected PCs have
line-of-sight access (even if through walls).
Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.
Away from large metal surfaces.
Putting the antenna in a vertical position provides best side-to-side coverage. Putting the
antenna in a horizontal position provides best up-and-down coverage.
If using multiple access points, it is better if adjacent access points use different
radio frequency
Channels to reduce interference. The recommended Channel spacing between adjacent access
points is 5 Channels (for example, use Channels 1 and 6, or 6 and 11).
The time it takes to establish a wireless connection can vary depending on both your security
settings and placement. WEP connections can take slightly longer to establish. Also, WEP
encryption can consume more battery power on a notebook computer.
Cabling Requirements
The WAG302 Access Point connects to your LAN via twisted-pair Category 5 Ethernet cable with
RJ-45 connectors.
Note: Failure to follow these guidelines can result in significant performance
degradation or inability to wirelessly connect to the WAG302. For complete
performance specifications, see Appendix A, “Specifications.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 119 120

Comments to this Manuals

No comments