Netgear PROSAFE WG302 User Manual download pdf (Page 12)

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

3-12 Basic Installation and Configuration

July 2005 v3.0

Figure 3-7: IP Settings menu

• Access Point Name (NetBIOS)

Enter a new name for the wireless access point and click Apply to save your changes.

• The IP Address

The wireless access point is shipped preconfigured with its DHCP client disabled and with the

following private static IP addresses:

– IP Address — 192.168.0.228

– IP Subnet Mask — 255.255.255.0

– Gateway — 0.0.0.0

– Primary and Secondary DNS Servers — 0.0.0.0

If your network has a requirement to use a different IP addressing scheme, you can make those

changes in this menu. These settings are only required if the “Use this IP address” radio button

is chosen. Remember to click Apply to save your changes.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 33 34

No comments

Netgear PROSAFE WG302 User Manual Page 12