Netgear RT311 User Manual download pdf (Page 86)

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

8-6 Using the Manager Interface to Configure the Router for Internet Access

Press [Enter].

The command interpreter displays the static IP routing table as shown in the example in

Figure 8-3.

Figure 8-3. IP Static Routing Table Example

In this example, the first route shown is the local Ethernet subnet connected to the LOCAL

interface (enif0). The second route is the default route, through the INTERNET interface

(enif1). All traffic from the LAN to a destination outside the LAN will be sent to the default

route and will be handled by the ISP.

After viewing the table, type “exit” to return to the menus.

To create additional static routes for IP:

In the Manager interface, open Menu 12 - IP Static Route Setup.

Select an unused number from the menu and press [Enter].

Menu 12.1 - Edit IP Static Route opens as shown in Figure 8-4.

ras> ip rout stat

Dest FF Len Interface Gateway Metric stat Timer Use

192.168.0.0 00 24 enif0 192.168.0.1 1 041b 0 0

default 00 0 enif1 10.118.18.1 1 001b 0 0

ras>

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 145 146

No comments

Netgear RT311 User Manual Page 86