Netgear RT311 User Manual download pdf (Page 64)

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

6-4 Maintenance

DHCP Table

The DHCP Table shows all IP address assignments that have been made by the router’s DHCP

server. From the Main Menu of the browser interface, click on Maintenance, then select DHCP

Table to view the table, shown in Figure 6-3

Figure 6-3. DHCP Table

For each PC client, the table shows the IP address, Ethernet MAC address, and NetBIOS Host

Name. Note that if the router is rebooted, the table data is lost until each PC renews its DHCP

lease.

Software Upgrade

The routing software of the Model RT311 and RT314 routers is stored in FLASH memory, and can

be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from

Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary

(.BIN) file before sending it to the router. The upgrade file can be sent to the router using your

browser.

Note:

The Web browser used to upload new firmware into the Model RT311 and RT314 routers

must support HTTP uploads. NETGEAR recommends using Netscape Navigator 3.0 or above.

To reach the Upgrade menu, click Maintenance from the navigation bar on the left, and then click

the Upgrade heading. To upload new firmware:

Download and unzip the new software file from NETGEAR.

In the Software Upgrade menu, click the Browse button and browse to the location of the

binary (.BIN) upgrade file

Click Upload.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 145 146

No comments

Netgear RT311 User Manual Page 64