Netgear R8000 User Manual Page 63

  • Download
  • Add to my manuals
  • Print
  • Page
    / 168
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 62
Share USB Devices Attached to the Router
63
Nighthawk X6 AC3200 Tri-Band WiFi Router
USB Device Requirements
The router works with most USB-compliant external flash and hard drives. For the most
up-to-date list of USB devices that the router supports, visit
http://kbserver.netgear.com/readyshare.
Some USB external hard drives and flash drives require you to load the drivers onto the
computer before the computer can access the USB device. Such USB devices do not work
with the router
.
The router supports the following file system types for full read/write access:
FAT16, FAT32
NTFS
NTFS with compression format enabled
Ext2, Ext3, Ext4
HFS
HFS+
Access a USB Device on the Network
ReadySHARE lets you access and share a USB device connected to the router USB port. (If
your USB device uses special drivers, it is not compatible.)
USB 3.0 port
Figure 11. The blue USB 3.0 port on the rear panel of the router provides the fastest access
To connect a USB device:
1. Insert your USB storage drive into a USB port on the rear panel of the router
.
NETGEAR recommends that you use the blue USB 3.0 port for the fastest access.
2. If your USB device uses a power supply
, connect it.
You must use the power supply when you connect the USB device to the router.
When you connect the USB device to the router USB port, it might take up to two minutes
before it is ready for sharing. By default, the USB device is available to all computers on
your local area network (LAN).
Page view 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 167 168

Comments to this Manuals

No comments