Netgear FR328S User Manual download pdf (Page 87)

Troubleshooting 8-1

M-10207-01, Reference Manual v2

Chapter 8

Troubleshooting

This chapter gives information about troubleshooting your FR328S ProSafe Firewall with Dial

Back-Up. For the common problems listed, go to the section indicated.

• Is the firewall on?

• Have I connected the firewall correctly?

Go to “Basic Functions“ on page 8-1.

• I can’t access the firewall’s configuration with my browser.

Go to “Troubleshooting the Web Configuration Interface“ on page 8-3.

• I’ve configured the firewall but I can’t access the Internet.

Go to “Troubleshooting the ISP Connection“ on page 8-4.

• I can’t remember the firewall’s configuration password.

• I want to clear the configuration and start over again.

Go to “Restoring the Default Configuration and Password“ on page 8-7.

Basic Functions

After you turn on power to the firewall, the following sequence of events should occur:

1. When power is first applied, verify that the Power LED is on.

2. Verify that the Test LED lights within a few seconds, indicating that the self-test procedure is

running.

3. After approximately 10 seconds, verify that:

a. The Test LED is not lit.

b. The Local port Link LEDs are lit for any local ports that are connected.

c. The Internet Link port LED is lit.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 134 135

No comments

Netgear FR328S User Manual Page 87