Netgear FR328S User Manual download pdf (Page 53)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2

Protecting Your Network 5-7

M-10207-01, Reference Manual v2

To access the Rules configuration of the FR328S, click the Rules link on the main menu, then click

Add for either an Outbound or Inbound Service.

Figure 5-5. Rules menu

• To edit an existing rule, select its button on the left side of the table and click Edit.

• To delete an existing rule, select its button on the left side of the table and click Delete.

• To move an existing rule to a different position in the table, select its button on the left side

of the table and click Move. At the script prompt, enter the number of the desired new

position and click OK.

Inbound Rules (Port Forwarding)

When Network Address Translation (NAT) is on, the FR328S presents only one IP address to the

Internet, and outside users cannot directly address any of your local computers. However, by

defining an inbound rule you can make a local server (for example, a web server or game server)

visible and available to the Internet. The rule tells the firewall to direct inbound traffic for a

particular service to one local server based on the destination port number. This is also known as

port forwarding.

When NAT is off, all Internet addresses on your LAN are presented to the Internet and outside

users can directly address any of your local computers. For security purposes, do not turn NAT off

unless the FR328S is behind another router or firewall.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 134 135

No comments

Netgear FR328S User Manual Page 53