Netgear FR328S User Manual download pdf (Page 30)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2

3-10 Connecting the Firewall to the Internet

M-10207-01, Reference Manual v2

How to Complete the Wizard-Detected Login Account Setup

If the Setup Wizard determines that your Internet service account uses a login protocol such as

PPP over Ethernet (PPPoE), you will be directed to a menu like the PPPoE menu in Figure 3-8:

Figure 3-8: Setup Wizard menu for PPPoE login accounts

Enter your Account Name (may also be called Host Name) and Domain Name. These

parameters may be necessary to access your ISP’s services such as mail or news servers. If you

leave the Domain Name field blank, the firewall will attempt to learn the domain

automatically from the ISP. If this is not successful, you may need to enter it manually.

2. Enter the PPPoE login user name and password provided by your ISP. These fields are case

sensitive. If you wish to change the login timeout, enter a new value in minutes.

Note: You will no longer need to launch the ISP’s login program on your PC in order to

access the Internet. When you start an Internet application, your firewall will automatically log

you in.

3. Domain Name Server (DNS) Address: If you know that your ISP does not automatically

transmit DNS addresses to the firewall during login, select “Use these DNS servers” and enter

the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is

available, enter it also.

Note: If you enter an address here, after you finish configuring the firewall, reboot your PCs

so that the settings take effect.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 134 135

No comments

Netgear FR328S User Manual Page 30