Netgear FR328S User Manual download pdf (Page 85)

FR328S ProSafe Firewall with Dial Back-Up Reference Manual v2

Advanced Configuration 7-9

M-10207-01, Reference Manual v2

How to Configure Static Routes

1. Log in to the firewall at its default LAN address of http://192.168.0.1 with its default User

Name of

admin, default password of password, or using whatever Password and LAN

address you have chosen for the firewall.

2. From the Main Menu of the browser interface, under Advanced, click on Static Routes to view

the Static Routes menu.

3. To add or edit a Static Route:

a. Click Edit to open the Static Routes edit menu.

Figure 7-2: Static Route Entry and Edit Menu

Type a route name for this static route in the Route Name box under the table.

This is for identification purpose only.

c. Select Active to make this route effective.

d. Select Private if you want to limit access to the LAN only.

The static route will not be reported in RIP.

e. Type the Destination IP Address of the final destination.

f. Type the IP Subnet Mask for this destination.

If the destination is a single host, type 255.255.255.255.

g. Type the Gateway IP Address, which must be a router on the same LAN segment as the

firewall.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 134 135

No comments

Netgear FR328S User Manual Page 85