Netgear WN802T User Manual Page 20

  • Download
  • Add to my manuals
  • Print
  • Page
    / 78
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 19
RangeMax NEXT Wireless-N Access Point WN802T Reference Manual
2-2 Installation and Configuration
v1.0, August 2007
For best results, place your wireless access point:
Near the center of the area in which your PCs will operate.
In an elevated location such as a high shelf where the wirelessly connected PCs have line-of-
sight access (even if through walls).
Away from sources of interference, such as PCs, microwaves, and 2.4 GHz cordless phones.
Away from large metal surfaces.
A Wall Mount Kit is provided with your wireless access point. For installation instructions, see
“Installing the Wall Mount Kit (Optional)” on page 2-10.
If using multiple access points, it is better if adjacent access points use different
radio frequency
Channels to reduce interference. The recommended Channel spacing between adjacent access
points is 5 Channels (for example, use Channels 1 and 6, or 6 and 11).
The time it takes to establish a wireless connection can vary depending on both your security
settings and placement. Some types of security connections can take slightly longer to establish
and can consume more battery power on a notebook computer.
System Requirements
Before installing the WN802T, make sure your system meets these requirements:
A 10/100/1000 Mbps Local Area Network device such as a hub, router, or switch.
The Category 5 UTP straight through Ethernet cable with RJ-45 connector included in the
package, or one like it.
The 100-240 V, 50-60 HZ AC Switching Power Source that came with your device.
A Web browser for configuration such as Microsoft Internet Explorer 6.0 or above, Netscape
Navigator 4.78 or above or Mozilla Firefox.
At least one computer with the TCP/IP protocol installed.
802.11n-compliant wireless adapters or 802.11b/g-compliant devices.
Note: Failure to follow these guidelines can result in significant performance degradation
or inability to wirelessly connect to the WN802T. For complete performance
specifications, see Appendix A, “Default Settings and Technical Specifications”.
Page view 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 77 78

Comments to this Manuals

No comments