Netgear WN3500RP User's Guide download pdf (Page 30)

Extender Network Settings

Universal Dual Band WiFi Extender – Desktop/Wallplug

 To view or change the advanced wireless settings:

Select Advanced > Wireless Settings. The following screen displays:

You can view or configure the following settings:

• Advanced Wireless Settings

- Enable W

ireless Access Point (2.4 GHz). Enable the extender to work as a wireless

access point. If this check box is cleared, then computers or wireless devices cannot

connect wirelessly to the extender.

- Enable SSID Broadca

st (2.4 GHz). Enable the extender to broadcast its wireless

network name (SSID). If this check box is cleared, then the wireless network is

hidden. To join a hidden wireless network, you have to type the wireless name.

- Enable W

ireless Access Point (5 GHz). Enable the extender to work as a wireless

access point. If this check box is cleared, then computers or wireless devices cannot

connect wirelessly to the extender.

- Enable SSID Broadca

st (5 GHz). Enable the extender to broadcast its wireless

network name (SSID). If this check box is cleared, then the wireless network is

hidden. To join a hidden wireless network, you have to type the wireless name.

• WPS Settings

- Disable Device

’s PIN. Selecting this check box disables the extender’s PIN. The PIN

can be used for a WPS wireless connection.

- Keep Exis

ting Wireless Settings. When this check box is selected, the settings in

the Wireless Settings screen stay the same when WPS is used for a wireless

connection.

• W

ireless Card Access List. Specify a list of computers or wireless devices that are

allowed to connect to the network. If you use an access list, then computers that are not

on the list are not allowed to join the wireless network.

 To set up a wireless card access list:

1. On

the Advanced Wireless Settings screen, click Setup Access List.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

No comments

Netgear WN3500RP User's Guide Page 30