Netgear WN3500RP User's Guide download pdf (Page 21)

Extender Network Settings

Universal Dual Band WiFi Extender – Desktop/Wallplug

1. Select Setup > Connect to an Existing Network. The extender scans for wireless

networks, and displays a list.

If your wireless network is not on the list, the extender might be too far away from the

router. See Positioning Your Extender on p

age 7 for suggestions.

2. Select th

e radio button for your network, and click Continue.

If you selected the manual option, you are prompted to type the network name (SSID)

nd to enter the password to access it:

3. Enter your network’s password or key, and click Continue.

The extender joins your wireless network.

Extender Wireless Settings

You can use the Wireless Settings screen to change the network name (SSID) for the

extender’s network and to set up wireless security. If you do not change these settings, the

network name is NETGEAR_EXT, and the network is open (no wireless security is set up).

Note: If you use a wireless computer to change the extender’s wireless

settings, you will be disconnected when you click Apply. To

reconnect, you have to select the new network name that you

created, and enter its password or wireless security key.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 42 43

No comments

Netgear WN3500RP User's Guide Page 21