Netgear WN2000RPT User Manual download pdf (Page 66)

FAQs and Troubleshooting

N300 WiFi Range Extender WN2000RPT

Improve the Connection Between the Extender and the

WiFi Router

The extender LEDs can help you tell whether the extender is correctly set up and working as

it should.

 To improve the connection between the extender and the WiFi router:

1. Move the extender closer to the WiFi router or to a different spot where it provides a

better line of sight.

ou might need to unplug the extender, replug it at its new location, and restart it. Unless

the extender is outside the range of your WiFi router, the extender connects automatically

to the WiFi router

2. As you move the extender, continue to check the Link Rate LED and the Device to Extender

LED on the top panel until you find a location where the Link Rate LED is green or amber,

and the Device to Extender LED is green.

The following table describes how the LEDs show the quality of the connection.

LED Status LED Color Performance

Both the Link Rate LED and the Device

to Extender Connection LED are green.

and The extender provides the best performance.

The Link Rate LED is amber and the

Device to Extender Connection LED is

green.

and The extender provides a workable performance.

The Link Rate LED is red. The extender provides a poor performance.

The Link Rate LED is off. The extender cannot function.

1 2 ... 61 62 63 64 65 66 67 68 69

No comments

Netgear WN2000RPT User Manual Page 66