Netgear WN2000RPT User Manual download pdf (Page 13)

Get Started

N300 WiFi Range Extender WN2000RPT

The Link Rate LED help you choose a spot where the extender-to-router connection is

optimal. The following tables describe how the LEDs show the quality of the connection.

If the Link Rate LED is off, the extender cannot connect to the WiFi router. If the Link Rate

LED is red, the extender has a poor connection to the WiFi router

8. If the extender has no connection or

a poor connection, move the extender closer to your

WiFi router and try again until the Link Rate LED is green, or at least amber.

9. Use a WiFi network manager on the computer or mobile device to connect to the extender’s

newly created WiFi network.

The extender’s default NETGEAR_EXT WiFi network name

(SSID) changes to the name of your existing WiFi network, with _EXT at the end of the

name, for example:

• Existing network name. MyNetworkName

• New extender network name. MyNetworkName_EXT

10. Select the new network and use your WiFi router password to connect.

You are now using your extended WiFi network.

Note: If your computer or mobile device cannot join the new WiFi network of

the extender, see You Cannot Join a WiFi Network and Receive an

Error Message on page 65.

LED Status LED Color Performance

Both the Link Rate LED and the Device

to Extender Connection LED are green.

and The extender provides the best performance.

The Link Rate LED is amber and the

Device to Extender Connection LED is

green.

and The extender provides a workable performance.

The Link Rate LED is red. The extender provides a poor performance.

The Link Rate LED is off. The extender cannot function.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 68 69

No comments

Netgear WN2000RPT User Manual Page 13