Netgear WN2000RPT User Manual Page 18
- Page / 69
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Get Started
18
N300 WiFi Range Extender WN2000RPT
The next screen that displays describes the color of the Link Rate LED, which
corresponds to the color of the LED on the front of the extender. Because you placed the
extender close the WiFi router, the Link Rate LED is green.
14. Click the Finish button.
A pop-up screen displays.
15. To bookmark the URL of the extender, click the OK button.
A NETGEAR website displays.
You are now online.
16. Now that the extender is connected to the WiFi router and you can connect a computer or
mobile device to the extender’s WiFi network, move it to a location where you can boost
your WiFi range.
The location you choose must be within the range of your existing WiFi router network.
17. Plug the extender into an electrical outlet at the new location and restart the extender.
Unless the extender is outside the range of your WiFi router
, the extender connects
automatically to the WiFi router
.
The Link Rate LEDs help you choose a spot where the extender-to-router connection is
optimal. The following tables describe how the LEDs show the quality of the connection.
If the Link Rate LED is of
f, the extender cannot connect to the WiFi router. If the Link Rate
LED is red, the extender has a poor connection to the WiFi router
.
18. If the extender has no connection or
a poor connection, move the extender closer to your
WiFi router and try again until the Link Rate LED is green, or at least amber.
LED Status LED Color Performance
Both the Link Rate LED and the Device
to Extender Connection LED are green.
and The extender provides the best performance.
The Link Rate LED is amber and the
Device to Extender Connection LED is
green.
and The extender provides a workable performance.
The Link Rate LED is red. The extender provides a poor performance.
The Link Rate LED is off. The extender cannot function.
- N300 WiFi Range Extender 1
- WN2000RPT 1
- Compliance 2
- Trademarks 2
- Table of Contents 3
- Overview 5
- Unpack Your Extender 6
- Front Panel LEDs and Button 6
- When to Use Your Extender 8
- How the Extender Works 9
- Get Started 10
- How to Position the Extender 11
- Security Settings 25
- Change the Password 27
- Use WPS with the PIN Method 35
- Configure WEP 39
- Manage Advanced WiFi Settings 41
- Manage a WiFi Access List 42
- Disable the Access List 44
- Ethernet LAN ports 51
- Use the Factory Reset Button 55
- Upgrade the Firmware 56
- FAQs and Troubleshooting 62
- WiFi Router 66
- Specifications 67
- Factory Default Settings 68
Related products and manuals for WLAN access points Netgear WN2000RPT
(2 pages)GBC Drtiče papíru uživatelské příručky
Začínající na 0-9
Comments to this Manuals