Netgear WGE111 User Manual download pdf (Page 22)

User Manual for the NETGEAR WGE111 Wireless Game Adapter

3-4 Basic Setup

Game Console Plug-and-Go Scenario

Figure 3-2: Internet Game Console Scenario

What you need.

• Broadband Internet access through a router with an 802.11b or 802.11g wireless access point

(built in to the router or separate) without any security features enabled.

Note: If you enabled security features (like WEP, SSID broadcast off, MAC filtering, etc.) you

need to follow the instructions given in “Using the NETGEAR Smart Wizard Configuration

Assistant” on page 3-9.

• A network-enabled game console.

What you do.

1. Connect the Ethernet cable from your WGE111 Wireless Game Adapter (A) to the Ethernet

port (B) in the game console.

2. Make sure that the switch on the back of the WGE111 is set to the left side (labeled Internet),

which corresponds to Infrastructure Mode.

3. Connect the power adapter to the WGE111 and verify the following:

• The power light goes on.

• The Internet light is lit.

• The Ethernet light is lit when connected to a network-enabled game console.

4. Enjoy your Internet gaming!

WGE111 Wireless

Game Adapter

Gaming Console or other

Ethernet-enabled device

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

No comments

Netgear WGE111 User Manual Page 22