Netgear WAC120 User Manual download pdf (Page 66)

Supplemental Information

802.11ac Wireless Access Point Model WAC120

Factory Settings

You can return the access point to its factory settings. Use the end of a paper clip or a similar

object to press and hold the Reset button on the back of the router for at least seven

seconds. The access point resets and returns to the factory configuration settings shown in

the following table.

Table 2. Factory default settings

Feature Description

LAN IPv4 management address 192.168.0.100

Subnet mask for IPv4 management

address

5.255.255.0

Required static IPv4 address for

management computer

192.168.0.210 and 255.255.255.0

User name (case-sensitive) for login admin

LAN and Management Features

DHCPv4 client Disabled

Untagged VLAN Enabled, VLAN ID 1

Management VLAN VLAN ID 1

Syslog Disabled

Spanning Tree Protocol (STP) Disabled

Time zone USA-Pacific

NTP client Enabled

Custom NTP server Disabled

Port speed 10/100/1000

Ethernet MAC address See product label

Radio and Wireless Settings

Operating mode Access point, infrastructure mode

Wireless access point name netgearxxxxxx, where xxxxxx are the last 6 digit

s of the

wireless access point MAC address

Country and region Varies by region

Wireless communication 2.4 GHz radio enabled

5 GHz radio enabled

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72

No comments

Netgear WAC120 User Manual Page 66