Netgear WAC120 User Manual download pdf (Page 27)

Initial Setup

802.11ac Wireless Access Point Model WAC120

To enable WPS, MAC authentication must be in its default state of disabled. For more

information, see MAC Authentication on page 24.

 To configure WPS:

1. Launch a web browser on the computer that is connected to the access point.

2. Enter http://1

92.168.0.100 in the address field of the browser.

A login prompt displays.

3. Enter the user name and password.

The user name is

admin and t

he default password is password.

The General screen displays.

4. Select Configuration > WPS.

5. To enable WPS, select the WPS Enable radio button.

WPS is enabled.

6. To disable the access point’s PIN, select the Disable

AP’s PIN check box.

The wireless client cannot use the access point’s PIN to connect to the access poi

nt.

7. To keep the existing access point’s wireless settings when a wireless

client uses WPS to

connect to the access point, select the Keep Existing Wireiess Settings check box.

Whether you use the access point’s PIN or wireless client’s PIN to

initiate the connection,

the access point’s preconnection wireless settings stay the same. The client’s wireless

settings change to the access point’s wireless settings after the connection.

8. Click the Apply

button.

Your settings are saved.

 To connect WiFi devices to your access point with WPS:

1. Launch a web browser on the computer that is connected to the access point.

2. Enter http://1

92.168.0.100 in the address field of the browser.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 71 72

No comments

Netgear WAC120 User Manual Page 27