Netgear WNR2000v3 User Manual download pdf (Page 22)

Manually Installing Your Router 18

A login window similar to the one shown in Figure 13 will display.

2. When prompted, enter admin for the router user name and password for the router password,

both in lowercase letters. (For security reasons, the router has its own user name and

password.)

The Firmware Upgrade Assistant screen will display.

3. Click Yes to check for new firmware (recommended). The router will automatically check the

NETGEAR database for a new firmware image file. If no new firmware version is available,

the message “No New Firmware Version Available” will display. (If you select “No,” you can

check for new firmware later; see the online User Manual.)

4. If new firmware is available, click Yes, and the router will automatically upgrade itself with

the latest firmware.

Figure 13

The router user name and password are not the same as any user name or

password you might use to log in to your Internet connection.

Do not try to go online, turn off the router, shut down the computer, or do

anything else to the router until the router finishes restarting! When the Power

light stops blinking, wait a few seconds more before using the router.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 41 42

No comments

Netgear WNR2000v3 User Manual Page 22