Netgear WNR2000v3 User Manual download pdf (Page 19)

Manually Installing Your Router 15

8. Review that your network is now set up (as shown in Figure 10); you are ready to start your

network.

9. Start your network in the correct sequence, as described below.

To start your network:

1. Plug in and turn on the cable or DSL modem. Wait 2 minutes.

2. Plug the end of the power adapter’s cord into the wall or a power strip, and into the power

adapter outlet of your wireless router (F). Wait 1 minute.

Figure 10

Failure to start or restart your network in the correct sequence could prevent you

from accessing the Internet.

Internet

••••••

••

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

No comments

Netgear WNR2000v3 User Manual Page 19