Netgear WNR2000 User Manual Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 144
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
NETGEAR Wireless-N Router User Manual
Customizing Your Network Settings 4-13
v1.2, January 2009
In the scenario shown, the following conditions must be met for both APs:
Both APs must use the same SSID, wireless channel, authentication mode (if any), and
encryption mode (see information about WEP in “Configuring WEP Wireless Security” on
page 2-9”).
Both APs must be on the same LAN IP subnet. That is, all the AP LAN IP addresses are in the
same network.
All LAN devices (wired and wireless computers) must be configured to operate in the same
LAN network address range as the APs.
If you are using DHCP, the Get Dynamically From ISP Gateway radio button in the Internet
IP Address section of the Basic Settings screen should be selected for all AP devices in the IP
Address Source section.
Wireless Repeating Function
You can view or change wireless repeater settings for the wireless router. From the main menu,
under Advanced, click Wireless Repeating Function to display the Wireless Repeating Function
screen.
Figure 4-8
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 143 144

Comments to this Manuals

No comments