Netgear WNR2000 User Manual download pdf (Page 50)

NETGEAR Wireless-N Router User Manual

2-20 Safeguarding Your Network

v1.2, January 2009

3. Click Add to add a wireless device to the wireless access control list. The Wireless Card

Access Setup screen opens and displays a list of currently active wireless cards and their

Ethernet MAC addresses.

4. If the computer you want appears in the Available Wireless Cards list, you can select the radio

button of that computer to capture its MAC address; otherwise, you can manually enter a name

and the MAC address of the authorized computer. You can usually find the MAC address on

the bottom of the wireless device.

5. Click Add to add this wireless device to the Wireless Card Access List. The screen changes

back to the list screen.

6. Repeat step 3 through step 5 for each additional device you want to add to the list.

Figure 2-12

Tip: You can copy and paste the MAC addresses from the router’s Attached Devices

screen into the MAC Address field of this screen. To do this, configure each

wireless computer to obtain a wireless link to the router. The computer should

then appear in the Attached Devices screen.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 143 144

No comments

Netgear WNR2000 User Manual Page 50