Netgear WNR2000 User Manual Page 125

  • Download
  • Add to my manuals
  • Print
  • Page
    / 144
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 124
NETGEAR Wireless-N Router User Manual
Troubleshooting 7-5
v1.2, January 2009
2. Check that PIN verification has succeeded for the WPS-enabled device you are connecting to
the router.
3. Make sure you have not pushed the push-button after disabling the WPS function (you logged
into the router and disabled this previously).
4. Check that the router is not in the temporary AP setup locked state (if you are using the
wireless repeater function).
For more information on WPS, see “Using Push 'N' Connect (Wi-Fi Protected Setup)” on
page 2-13.
Login Problems
If you are unable to log in to the wireless router, check the following:
If you are using an Ethernet-connected computer, check the Ethernet connection between the
computer and the router as described in the NETGEAR Wireless Router Setup Manual.
Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that the Caps Lock is off when entering this
information.
Make sure your computer’s IP address is on the same subnet as the router. If your are using the
recommended addressing scheme, your computers address should be in the range of
192.168.1.2 to 192.168.1.254. Refer to your computers documentation or see “Preparing Your
Network” in Appendix B for help with configuring your computer.
If your routers IP address has been changed and you don’t know the current IP address, reset
the router’s configuration to the factory defaults. This procedure will reset the routers IP
address to 192.168.1.1 (see “Default Configuration Settings” in Appendix A).
Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded. Try closing the browser and
reopening it again.
Note: If your computer cannot reach a DHCP server, some operating systems will
assign an IP address in the range 169.254.x.x. If your IP address is in this
range, verify that you have a good connection from the computer to the router,
then restart (reboot) your computer.
Page view 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 143 144

Comments to this Manuals

No comments