Netgear WNDR3800 User Manual download pdf (Page 79)

Administration

N600 Wireless Dual Band Gigabit Router Premium Edition WNDR3800

 To restore configuration settings that you backed up:

1. Enter the full path to the file on your network, or click the Browse button to find the file.

2. When you

have located the .cfg file, click the Restore button to upload the file to the router.

Upon completion, the router reboots.

Erase

Under some circumstances (for example, if you move the router to a different network or if

you have forgotten the password), you might want to erase the configuration and restore the

factory default settings.

You can either use the Restore Factory Settings button on the back of the router (see Factory

Default Settings on p

age 119), or you can click the Erase button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to

192.168.1.1, and enables the

router’s DHCP.

Set Password

This feature allows you to change the default password that is used to log in to the router with

the user name admin.

This is not the same as changing the password for wireless access. The label on the bottom

f your router shows your unique wireless network name (SSID) and password for wireless

access (see Label on p

age 13).

 To set the password for the user name admin:

1. Select Adv

anced > Administration > Set Password to display the following screen:

2. Type the old password and type the new password twice in the fields on this screen.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 128 129

No comments

Netgear WNDR3800 User Manual Page 79