Netgear WNDR3400 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 149
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
N600 Wireless Dual Band Router WNDR3400 User Manual
Configuring Your Internet Connection 1-8
v1.0, August 2010
Table 1-1. Basic Settings screen fields
Settings Description
Does Your ISP Require a Login? Yes
•No
These fields
appear only if no
login is required.
Account Name
(If required)
Enter the account name provided by your ISP. This might also
be called the host name.
Domain Name
(If required)
Enter the domain name provided by your ISP.
These fields
appear only if
your ISP
requires a login.
Internet Service Provider PPTP (Point to Point Tunneling Protocol). This is used
primarily in Austrian DSL services.
Other. This is the default setting. It is for PPPoE (Point to
Point Protocol over Ethernet), the protocol used by most
DSL services worldwide.
Login The login name provided by your ISP. This is often an e-mail
address.
Password The password provided by your ISP.
Service Name If your ISP provided a Service Name, enter it here.
Connection Mode Specify when the router will connect to and disconnect from
the Internet.
Always On. The router logs in to the Internet immediately
after booting and never disconnects.
Dial on Demand. The router logs in only when outgoing
traffic is present and logs out after the idle time-out.
Manually Connect. The router logs in or logs out only when
you click Connect or Disconnect in the Router Status
screen.
Idle Timeout (In minutes) If you want to change the Internet login time-out, enter a new
value in minutes. This determines how long the wireless router
keeps the Internet connection active after there is no Internet
activity from the LAN. Entering an Idle Timeout value of 0
(zero) means never log out.
Internet IP Address Get Dynamically from ISP. Your ISP uses DHCP to assign
your IP address. Your ISP automatically assigns these
addresses.
Use Static IP Address. Enter the IP address that your ISP
assigned. Also enter the IP subnet mask and the gateway IP
address. The gateway is the ISP’s wireless router to which
your wireless router will connect.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 148 149

Comments to this Manuals

No comments