Netgear WNDR3400 User Manual Page 98

  • Download
  • Add to my manuals
  • Print
  • Page
    / 149
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 97
N600 Wireless Dual Band Router WNDR3400 User Manual
Customizing Your Network Settings 5-26
v1.0, August 2010
Setting Up a Repeater Unit
Use a wired Ethernet connection to set up the repeater unit to avoid conflicts with the wireless
connection to the base station.
To configure a WNDR3400 router as a repeater unit:
1. Log in to the router that will be the repeater. Check the screen, and verify that the match the
base unit exactly. The wireless security option must be set to WEP or None.
2. In the Wireless Repeating Function screen (depending on the frequency you want to use),
select the Enable Wireless Repeating Function check box and the Wireless Repeater radio
button.
3. Fill in the Repeater IP Address field. This IP address must be in the same subnet as the base
station, but different from the LAN IP of the base station
4. Click Apply to save your changes.
5. Verify connectivity across the LANs.
A computer on any wireless or wired LAN segment of the wireless router should be able to
connect to the Internet or share files and printers with any other wireless or wired computer or
server connected to the other AP.
Note: If you are using the WNDR3400 base station with a non-NETGEAR wireless
router as the repeater, you might need to change additional configuration settings.
In particular, you should disable the DHCP server function on the wireless
repeater AP.
Page view 97
1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 148 149

Comments to this Manuals

No comments