Netgear ROUTER WGT624 User Manual Page 90

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 89
108 Mbps Wireless Router WGT624 v4 Reference Manual
A-2 Technical Specifications and Default Configuration
v1.2, July 2007
Default Configuration Settings
You can use the reset button located on the back of your WGT624 v4 wireless router to reset all
settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold
the reset button for 3 seconds. Your wireless router will return to the factory configuration settings
shown in the table below.
Interface Specifications
LAN: 10BASE-T or 100BASE-TX, RJ-45
WAN: 10BASE-T or 100BASE-TX, RJ-45
Wireless
Radio Data Rates 1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing
Frequency 2.4-2.5 GHz
Data Encoding: Direct Sequence Spread Spectrum (DSSS)
Maximum Computers Per Wireless
Network:
Limited by the amount of wireless network traffic generated by
each node. Typically 30-70 nodes.
Operating Frequency Ranges: 2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
Encryption: 40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Table A-1. Default Configuration Settings
Feature Default Behavior
Smart Wizard Disabled
Router Login
Router Login URL http://www. routerlogin.net or http://www.routerlogin.com
Login Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use default hardware address
MTU Size 1500
Local Network
Page view 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Comments to this Manuals

No comments