Netgear ROUTER WGT624 User Manual download pdf (Page 46)

108 Mbps Wireless Router WGT624 v4 Reference Manual

2-14 Wireless Settings and Security

v1.2, July 2007

5. Click Add to add a wireless device to the wireless access control list. The Available Wireless

Cards list displays.

6. In the Available Wireless Cards list, either select from the list of cards the WGT624 v4 has

found in your area, or enter the MAC address and device name for a device you plan to use.

You can usually find the MAC address printed on the wireless adapter.

7. Click Add to add this wireless device to the Wireless Card Access list. The screen changes

back to the list screen. Repeat these steps for each additional device you wish to add to the list.

8. Repeat steps 5-7 for each additional device you wish to add to the list.

9. Be sure to click Apply to save your wireless card access list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WGT624 v4.

Figure 2-7

Tip: You can copy MAC addresses from the Attached Devices page, and then paste

them into the MAC Address box. To do this, configure each wireless computer

to obtain a wireless link to the wireless router. The computer should then appear

in the Attached Devices page.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 97 98

No comments

Netgear ROUTER WGT624 User Manual Page 46