Netgear R6200 User Manual Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 131
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
Advanced Settings
93
R6200v2 Smart WiFi Router
5. Click the Add button.
The screen changes back to the list screen.
6. Add each computer or device you want to allow to connect wirelessly
.
7. Select the T
urn Access Control On check box.
8. Click the Apply button.
To edit a wireless device or delete it from the access list:
1. Select ADV
ANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2. In the table, select the radio button next to the wireless device that you want to edit or
delete.
3. Do one of the following:
Click the Edit button.
The Edit Wireless Card screen displays.
a. Edit the address information.
b. Click the Accept button.
Click the Delete button.
The address is removed from the table.
Wireless Access Point
You can set up the router to run as an access point (AP) on the same local network as
another router.
To set up the router as an AP:
1. Use an Ethernet cable to connect the Internet port of this router to a LAN port in the
other router
.
Cable this port to a LAN port
on the other router
2. Select ADVANCED > Advanced Setup > Wireless Settings.
3. Select the Enable Access
Point Mode check box.
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 130 131

Comments to this Manuals

No comments