Netgear R6200 User Manual download pdf (Page 77)

Security

R6200v2 Smart WiFi Router

2. In the Service Name field, type a descriptive service name.

3. In the Service User list, select Any

, or select Single address and enter the IP address of

one computer.

• Any (the default), allows any computer on the Internet to use this service.

• Single address restricts the service to a particular computer

4. Select the service type, either TCP or UDP or TCP/UDP (both). If you are not sure, select

TCP/UDP

5. In the

Triggering Port field, enter the number of the outbound traffic port that will trigger the

inbound ports to open.

6. Enter the inbound connection port information in the Connection

Type, Starting Port, and

Ending Port fields.

7. Click the Apply button.

The service appears in the Port Triggering Portmap table.

8. Make sure that you enable port triggering so that the service that you added will be used.

Schedule Blocking

You can specify the days and time that you want to block Internet access.

 To schedule blocking:

1. Select ADV

ANCED > Security > Schedule.

2. Set up the schedule for blocking keywords and services.

• Days to Block. Select days on which you want to apply blocking by selecting the

appropriate check boxes, or select the Every Day check box to select the check

boxes for all days.

• T

ime of Day to Block. Select a start and end time in 24-hour format, or select the All

Day check box for 24-hour blocking.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 130 131

No comments

Netgear R6200 User Manual Page 77