Netgear HR314 User Manual download pdf (Page 15)

I cannot get onto the Internet with a computer

You may not have restarted the computer or the network to have TCP/IP changes take effect.

• Restart the computer.

• Restart the Network as described on page 9.

Your computer may not recognize any DNS addresses.

• If you typed in addresses of one or two DNS servers when you configured the router,

restart your computer. Open the router’s Settings pages and verify that the DNS addresses

appear. See instructions on page 10 to view the router’s Basic Settings page.

Your computer may not have the correct TCP/IP settings to recognize the router.

• Restart the computer and check that you have TCP/IP set up properly on your computer.

For Windows, the Network Properties should have Obtain an IP address automatically

selected (see page 8). For Macintosh computers, the TCP/IP (or Network) control panel

should be set to Using DHCP Server (see page 8).

• You should also verify that the gateway address or the router’s local IP address is

192.168.0.1. The computer’s IP address should be between 192.168.0.3 and

192.168.0.254.

Your router might not be able to obtain an IP address from the ISP.

1. Start your browser, type the address for an external site (like www.NETGEAR.com),

and press Enter (Windows) or Return (Macintosh).

2. Go to the router’s Settings pages by going to http://192.168.0.1.

3. In the User ID box type admin, in the Password box type password, and click OK.

4. Under the Maintenance heading, click Router Status.

5. Check that an IP address is shown for the WAN Port.

If you see 0.0.0.0, contact your ISP to get current configuration information.

Your wireless connection may be misconfigured.

• Verify that the PC’s SSID and WEP settings match the router’s settings.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

No comments

Netgear HR314 User Manual Page 15