Netgear DGND3300 User Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Protecting Your Network 3-9
v1.0, March 2009
To block access to Internet services:
1. Select Services under Security in the main menu. The Services screen displays.
2. To add a service, click Add Custom Service. The following screen displays.
3. Enter a name for the service.
4. From the Service Type drop-down list, select the application or service to be allowed or
blocked. If you know that the application uses either TCP or UDP, select the appropriate
protocol. If you are not sure, select Both.
5. You can block the specified service for a single computer, a range of computers with
consecutive IP addresses, or all computers on your network. Enter the starting port and ending
port numbers. If the application uses a single port number, enter that number in both fields.
You must determine which port number or range of numbers is used by the application. The
service port numbers for many common protocols are defined by the Internet Engineering
Task Force (IETF) and published in RFC1700, “Assigned Numbers.” Service numbers for
other applications are typically chosen from the range 1024 to 65535 by the authors of the
application. You can often determine port number information by contacting the publisher of
the application, by asking user groups or newsgroups, or by searching.
6. Click Apply so that your changes take effect.
Figure 3-6
Figure 3-7
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 117 118

Comments to this Manuals

No comments