Netgear DGB111G Operations Instructions download pdf (Page 31)

Reference Manual for the Model Wireless ADSL Firewall Router DG834G

Connecting the Router to the Internet 3-5

202-10006-05, June 2005

Connecting the DG834G to Your LAN

This section provides instructions for connecting the DG834G wireless router.

Note: The Resource CD included with your router contains an animated Installation Assistant to

help you through this procedure.

How to Connect the Router

There are four steps to connecting your firewall:

1. Install ADSL filters on the phone lines.

2. Connect the router to the ADSL filter.

3. Log in to the router.

4. Connect to the Internet.

Follow the steps below to connect your router to your network. Before you begin, locate the ADSL

configuration information from your Internet Service Provider (ISP).

1. CONNECT ADSL FILTERS ON THE PHONE LINES.

a. You need to install a filter on every telephone or device that shares the same phone

number as your ADSL router. Select the filter that came with your router.

Figure 3-3: ADSL microfilters

Note: If you purchased the DG834G in a country where the filter is not included, you must

acquire one.

b. Two-Line Filter Example. Insert the two-line filter into the phone outlet and connect the

phone to the phone line connector (A):

Phone

DSL

Line

One-Line Filter

Two-Line Filter

Splitter

With Splitter

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 267 268

No comments

Netgear DGB111G Operations Instructions Page 31