Netgear XET1001 User Manual download pdf (Page 13)

XET1001 Wall-Plugged Ethernet Adapter User Guide

v1.0, January 2008

a. Plug the blue Ethernet cable that came in the box into a LAN port on your router or switch

in your network.

b. Plug the PowerLine adapter into an electrical outlet near the router.

c. Plug the other end of blue Ethernet cable that came in the box into the PowerLine adapter.

Check the status lights:

• Power: The power LED turns solid green. If it does not, see “Troubleshooting” on

page 15.

• HomePlug: The HomePlug LED blinks to indicate that the device is connected to the

power line, and that no other PowerLine devices have been detected at this stage.

• Ethernet: The Ethernet LED blinks to indicate activity. If not, make sure that the

Ethernet cable on the PowerLine adapter that you connected in the previous step is

securely attached to the PowerLine adapter and the router, that the router is connected

to the modem, and the router and modem are powered on.

d. Make sure that the Internet port of your router is connected to your modem, and that your

computer is either connected to a LAN port on the router or to a port on the PowerLine

adapter.

Figure 7

Wall-Plugged Ethernet Adapter XET1001

router

power LAN Internet

ports

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

No comments

Netgear XET1001 User Manual Page 13