Netgear XET1001 User Manual download pdf (Page 18)

XET1001 Wall-Plugged Ethernet Adapter User Guide

v1.0, January 2008

Set Your Network Password

The fastest and most reliable way to set the network password is to set the password for all devices

at once. To do this, you need the device password on the back label of each PowerLine device.

There are two steps to setting the password: first enter the device password for each remote

PowerLine device, and then set the network password.

1. Enter the device password for each remote PowerLine device:

a. Make sure that all PowerLine devices are plugged into 100~240V AC wall sockets.

b. Start the PowerLine encryption utility and click the Main tab.

c. Check that the utility lists all the remote PowerLine devices

d. Select a PowerLine device and, if more than one remote device is listed, identify it from

the MAC address.

Figure 13

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Netgear XET1001 User Manual Page 18